Reduce the difficulty of process management

①Wire is fed according to the set value.

②Can store 100 workpiece parameters. Each workpiece can set 10 groups of brazing parameters according to the different brazing process.

③Double password setting, only administrator password can modify corresponding

parameters

Reduce material waste

The traditional straight wire feeding is changed to spool wire feeding.

Each straight wire needs to be wasted once, while the spool wire only needs to be wasted once.

Improve the consistency of brazing filler

The wire feeding accuracy is within 2%.

Preheating reminder function

Press the wire feeding button, when the preheating time is reached, the green light will be on, reminding that the preheating time is up, which improves the consistency of preheating time of each weld.

Wire feeding speed is adjustable within (1mm-40mm)/s

Different wire requires different wire feeding speed.

Quality：

1.Wire length required can be set, improve the consistency of brazing filler, the brazing CPK index is increased .

2. The preheating time required for brazing can be set, defect rate is reduced.

Cost down：

The traditional straight wire feeding is changed to spool wire feeding. Each traight wire needs to be wasted once, while the spool wire only needs to be wasted once; reduce material waste.

Safety：

The operation mode of holding brazing wire directly with hand will be replaced with the wire feeding gun, the risk of scalding will decrease.

Digital wire feeder can be used with any gas saving igniter.